Message Boards

8340 led disable

mvalkonen, modified 3 Years ago.

8340 led disable

Youngling Posts: 3 Join Date: 9/12/17 Recent Posts

Should I be able to shut off the led using a dip ( led disable) behind the speaker?

 

 

jani-oksanen, modified 3 Years ago.

RE: 8340 led disable

Jedi Master Posts: 431 Join Date: 3/30/17 Recent Posts

Hi,


Thank you for contacting us. When using 8340A with GLM network, and applying LED-disable switch ON, it is needed to restart the monitor from the power button behind the monitor to apply this change to the monitor. Without GLM network LED-disable switch works without the need of restarting the monitor. Please let us know if you have any problem with the LED-disable function!

 

Best Regards,
Jani Oksanen
Factory Service Team

mvalkonen, modified 3 Years ago.

RE: 8340 led disable

Youngling Posts: 3 Join Date: 9/12/17 Recent Posts

Jani,

Thank you for your quick reply.

Yes I have the GLM but I use the speakers stand alone. Only calibration is done by GLM. I have restarted the monitors after calibration but GLM network has been disconnected.  Led won’t go off. Do I have to restart the monitors while the GLM network is on? GLM recognize that led disable dip is on.

jani-oksanen, modified 3 Years ago.

RE: 8340 led disable

Jedi Master Posts: 431 Join Date: 3/30/17 Recent Posts

Hi,

Thank you for getting back to me. I have now discussed about this issue with our R&D, and unfortunately at the moment it is not possible to have LED-disable working when using monitors in stand alone mode. This means if you have put Stored -switch ON, it disables other DIP-switches from use.

If you would like to have LED-disable working and use room calibration, it is possible if you dont apply stored DIP-switch on, and you have GLM opened when using the monitors to have calibration settings applied.

I will forward this information to our GLM developers to investigate the possibility to add feature to shut down LED in the GLM when using standalone/Stored -DIP switch. Hopefully we can get this feature to our next GLM release. Thank you for your feedback, it is much appreciated!
 

Best Regards,
Jani Oksanen
Factory Service Team

 

 

 

mvalkonen, modified 3 Years ago.

RE: 8340 led disable

Youngling Posts: 3 Join Date: 9/12/17 Recent Posts

Thank you for the information.

It would be a great feature! Hopefully you will have it soon.